Skip to main content
Description
Technical Specifications
| Feature | Data |
| Adjustment Range | 5 to 160 PSIG (0.3 to 11 bar) |
| Max Supply Pressure | 250 PSIG (17.2 bar) |
| Gauge Ports | Two (2) 1/8″ NPT (Front/Back) |
| Construction | Die-Cast Zinc / Reinforced Nylon |
| Design Type | Relieving (Self-Bleeding) |
| Operating Temp | 0°F to 150°F (-18°C to 65°C) |
Why Use a Streamtek™ Regulator?
In many industrial applications, “more” isn’t “better.” Running a Streamtek™ Air Knife at 100 PSIG when 60 PSIG would do the job results in higher energy costs and unnecessary noise.
-
Energy Savings: Reducing pressure by just 10 PSIG can result in a 5% to 10% reduction in air consumption.
-
Repeatability: Maintains a constant output pressure regardless of fluctuations in the main supply line.
-
Locking Knob: Features a “push-to-lock” adjustment knob to prevent accidental pressure changes in high-traffic areas.
-
Relieving Design: Automatically vents excess downstream pressure when adjusting from a high setting to a lower one, ensuring immediate accuracy.
Installation & Setup
-
Sequence: For the best performance, always install the Streamtek™ Air Filter before the Streamtek™ Pressure Regulator to protect the regulator’s internal diaphragm from debris.
-
Mounting: Can be mounted in any orientation, though vertical is standard.
-
Gauge Installation: Use the included pressure gauge on either the front or back port for easy monitoring of downstream pressure.
Pro-Tip: “Demand-Side” Management
By installing a Streamtek™ Pressure Regulator at the point of use, you decouple your equipment from the fluctuating “shop air” pressure. This ensures your cooling or blow-off process remains consistent throughout the entire shift.