Call Us — US & Canada: 1-888-218-6548 — Worldwide: 1-705-770-4455
Hi-Temp Adjustable Air Amplifier
- 0 Review(s)
- Add your review
The STREAMTEK Hi-Temp Adjustable Air Amplifier is ideal for moving hot air to surfaces which require uniform heating while in a furnace or oven. They are typically used as exhausters. The Amplifier is made up of 316 Stainless Steel and can withstand up to 700°F.
HI-TEMP ADJUSTABLE AIR AMPLIFIER: Informations
What is an Air Amplifier?
The STREAMTEK™ Air Amplifier is a simple, low cost way to move smoke, air, light materials, and fumes. Using just a small amount of compressed air as their power source, Air Amplifiers pull in massive volumes of air from the surrounding environment to produce high velocity, high volume outlet flows. Quiet, efficient STREAMTEK™ Air Amplifiers will create output flows up to 25 times their consumption rate.
Which will best suit my needs?
The Adjustable Air Amplifier is available in both Aluminum and Stainless Steel. Both are easy to mount and maintain, reducing both compressed air consumption and noise levels. The Air Amplifier has an air gap that is infinitely adjustable which regulates the consumption and outlet flow from a “breeze” to a “blast”.
|Air Amplifier Comparison|
|Temperature Rating||Sound Level||Corrosive Applications||Description|
|Aluminum||275°F (135°C)||Variable||No||1-1/4" to 4"
(32 to 102 mm)
|Stainless Steel (Type 303)||400°F (204°C)||Variable||Yes||1-1/4" to 4"
(32 to 102 mm)
|Hi-Temp Stainless Steel (Type 316)||700°F (371°C)||Variable||Yes||1-1/4" or 2-1/2"
(32 or 64 mm)
HI-TEMP ADJUSTABLE AIR AMPLIFIER: Specifications
|Diameter||Model No.||Material||Throat Diameter||Amplification Ratio|
|1½"||SAM114HS||316 Stainless – 700°F (371°C)||1.01" (26 mm)||16:1|
|2½"||SAM212HS||316 Stainless – 700°F (371°C)||2.03" (52 mm)||25:1|
How to Determine Air Consumption & Total Output Flow for any Hi-Temp Adjustable Air Amplifier?
From the performance graphs (below), determine the total output flow for the Hi-Temp Adjustable Air Amplifier at any pressure.
(Tested with factory pre-set .002″ Gap). See chart below for quick reference OR divide Total Output Flow by Amplification Ratio, using performance graphs below.
|20 PSIG (1.4 Bar)||4.5||127||12.0||340|
|40 PSIG (2.8 Bar)||7.0||198||19.5||552|
|60 PSIG (4.1 Bar)||10.0||283||24.5||693|
|80 PSIG (5.5 Bar)||13.0||367||29.0||821|
|100 PSIG (6.4 Bar)||14.5||410||35.0||991|
|120 PSIG (8.4 Bar)||17.0||481||42.0||1189|
1-1/4″ Adjustable Air Amplifier – Performance Graphs.
Adjustable Air Amplifier: DUCTING
Both the vacuum intake (inlet) and discharge ends can be ducted for fume conveying and light material applications. It is important that care is taken to avoid restrictions that could cause suction resistance or back pressure that will reduce the performance levels.
Adjustable Air Amplifier Air Flow Pattern
|SAM114A, SAM114S, SAM114HS||2" (51mm)||3" (76mm)||4.8" (122mm)||6.3" (160mm)|
|SAM212A, SAM212S, SAM212HS||3.1" (79mm)||4" (102mm)||5.5" (140mm)||7.7" (196mm)|
HI-TEMP ADJUSTABLE AIR AMPLIFIER: FAQs
Below is a list of Frequently Asked Questions relating to our Hi-Temp Adjustable Air Amplifier. If you need additional help with your application and/or can’t find an answer to your question, please call our factory at 1-705-770-4455 or email an Application Engineer at firstname.lastname@example.org.
1. Can my compressed air pressure be increased with an Air Amplifier?
No. The Hi-Temp Adjustable Air Amplifier only amplifies volume, not pressure. The outlet pressures are well below 1 PSIG. The Air Amplifiers takes energy from a small volume of compressed air to produce its high velocity, high volume, low pressure output airflow.
2. How do I mount the Air Amplifier?
A rigid air pipe is the optimal way to mount the Air Amplifier. The rigid air pipe will easily hold up to the very large air flow created.
3. Can I connect the cold end of a Vortex Tube to an Air Amplifier?
No. The Air Amplifier would restrict the air flow of the Vortex Tube to the point where back-pressure would limit the cooling capacity of the Vortex Tube. The cold end of the Vortex Tube should not be subjected to a backpressure in excess of 5 PSIG.
4. I’d like to attach ducting to the Air Amplifier, how much ducting is ok?
We recommend a maximum of 15′ of ducting on the exhaust side of the Air Amplifier and a maximum of 5′ of duct on the intake side of the Air Amplifier.
HI-TEMP ADJUSTABLE AIR AMPLIFIER: How it Works
(A) Compressed air flows through the NPTF inlet and into an annular chamber. It’s then directed through a small ring nozzle at an extreme high velocity.
(B) The airflow now enters the inside of the amplifier over a ‘coanda’ profile, thereby creating a vacuum which entrains the surrounding air into the primary airstream.
(C) This combined flow of surrounding & primary air is then exhausted from the High Temperature Air Amplifier in a high velocity, high volume flow.
HI-TEMP ADJUSTABLE AIR AMPLIFIER: Applications
STREAMTEK products use innovative compressed air technologies to improve productivity, increase equipment efficiency, deliver enclosure and spot cooling, conveying, and blow-off. If you don’t find a solution and/or idea for your application, or if you want additional details, call our factory at 1-705-770-4455 or email an Application Engineer at email@example.com.
Application Examples from our Customers!
Blowing Water Off Parts
Application: Blow Off
This customer had multiple components coming out of a rinsing system before the final protective gloss finishing line. He needed to ensure that there would be virtually no spots on the product(s) surface before the final gloss was applied. Since his parts varied in height, length, diameter, etc., the total opening needed to be slightly larger than that of the largest part passing through. With an opening of 56″ wide x 40″ tall, we recommended six (6) Model SAM002A (2″ Adjustable Aluminum Air Amplifiers) be installed.
Noxious fumes are created in manufacturing when released from the furnishings, building finishes and energy production. The Model SAM004 (4″ Adjustable Aluminum Air Amplifier), powered entirely by compressed air and with no moving parts, was able to quickly and safely perform the evacuation of fumes. Installation was also very easy!
A company in India manufactures various products from metal pipes. After the pipes have had their final finishing coat applied, approximately 3″ of area near the middle of each pipe needed to have its bare metal exposed before a subsequent operation was to be completed. The clients used a rotary tool /w heavy-grit sandpaper to perform the job. The dust being created from the operation caused health concerns for nearby workers. The Model SAM002A (2″ Aluminum Air Amplifier) was installed close to where the rotary tool was working and easily vacuumed away the debris/dust before it had a chance to go airborne.
Magician uses Air Amplifier
Our customer Roy, an up and coming Magician in the Cincinnati area needed a way to evacuate smoke from his 4′ x 4′ x 3′ enclosure. On cue, our Model SAM114A (1-1/4″ Aluminum Air Amplifier) was activated and the smoke was completely vacuumed from the chamber in under 5 seconds! It’s instant on-off operation allowed the air amplifier to achieve its 100% operating potential within milliseconds from flicking the switch.
Air Amplifier Blows in Product Coding
Application: Blow off
A toy manufacturer in Malaysia assembled lightweight plastic dump trucks, cars, bulldozers, etc., for children. To meet strict health and safety regulations, the various parts needed to go through a washing system before final assembly. A product code must then be applied to the underside of each toy. If the toy was still wet, the code was applied and instantly smudged making the code unreadable. After speaking with our Application Engineer(s), the toy manufacturer decided on a Model SAM001A (1″ Adjustable Aluminum Air Amplifier). Previously, the client used a series of standard nozzles which consumed excessive amounts of compressed air and never completed the job to the customers liking.
A Canadian company manufactures industrial strength rope. Before the final spooling stage, they have to melt each end of the rope to stop it from unraveling and fraying. During this process an extremely foul odour is produced and tends to linger around the workspace for quite some time. Since the melting of the rope at each end is very quick and small, a Model SAM001A could provide just over 130 SCFM (3,679 SLPM) of airflow which was more than enough to vent the foul odours away!
Press Fit Cylindrical Parts
The force required to assemble ‘press fit’ cylindrical parts directly, depends on the clearance or allowance between the parts for fit, area of the positioned and the fitted surfaces. Our customers who manufacture wheel bearings, applied heat to the outer ring of the bearing housings and then dropped in the sealed bearing components. On average it took approximately 30 minutes for the outer ring to cool down, thus creating a press fit. By installing our Model SAM114A 1-1/4″ Aluminum Adjustable Air Amplifier, the client was able to reduce cooling time down to under 10 minutes.
Blowing Snow effect to a Theatre production
By using Model SAM004A 4″ Adjustable Air Amplifier, a traveling theatre production was able to create a snow blowing effect on stage. It was used to enhance the experience for the audience by providing a more realistic blizzard effect.
Cooling Hot Spots in Refinery Ducting
One of our customers had a refinery where heat insulation had fallen away from a duct system and needed to be repaired ASAP. To prevent costly downtime, a 3″ Model SAM003S Stainless Steel Air Amplifier easily cooled hot spots on the duct where insulation had worn away. Since space was also at a minimum, the STREAMTEK Air Amplifier was a natural fit.
Cooling Ingots Travelling on a Conveyor
World Class ingot manufacturer makes bronze, brass, and steel ingots under the most stringent conditions. (2) Model SAM002A Adjustable Aluminum Air Amplifiers were placed over-top the ingots traveling on a conveyor to reduce cooling time by 30%. A pressure regulator was installed in-line for quick and easy control of both airflow and force.
Inducing fresh air into Tank
Another one of our customers repaired holding tanks that contained Hydrogen Sulfide, a colorless gas with an odor similar to rotten eggs. Excessive exposure in confined spaces to this “sewer gas” has been linked to multiple deaths across the United States. Our customer used Model SAM004A Adjustable Air Amplifier in order to emit 1500 cubic feet per minutes of fresh ambient air into the tank, enabling personnel to safely perform required work.
Cooling a Weld on Differential
An automotive manufacturing facility based in Korea used a STREAMTEK Model SAM212A 2-1/2″ Adjustable Air Amplifier to cool multiple welds on their differentials. The clients were able to cool the welds from ~490°F (254°C) to 275°F (135°C) in less than 50 seconds! The clients implemented smaller versions of our air amplifiers into other areas of their production line.
HI-TEMP ADJUSTABLE AIR AMPLIFIER: Dimensions
– Easy to Adjust! Airflow/lock ring holds the adjustment; no tools required.
– Ducting can be attached to ends.
– Quiet! Meets OSHA pressure and noise requirements.
– Lowest Price in the industry! Find a competitors equivalent Air Amplifier for less? Contact our factory and we will beat it by 20%; it’s our standard policy.
|DIMENSIONS: Hi-Temp Adjustable Air Amplifier|
|A (O.D.)||B||C||D||E||F||G||H (I.D.)|
STREAMTEK has a wide variety of accessories for use with STREAMTEK's compressed air-operated products. These accessories can be used with above product.